How to properly clean the bathtub

1.Weekly cleaning

When cleaning the acrylic bathtub, use a sponge or a flannel. Do not use coarse or clean cloth. Do not use any cleaning agents containing particulate objects. It is best to avoid direct sunlight and contact with high temperature butts. Use mild detergents (such as dishwashing detergent). Do not use abrasive cleaners. Acrylic bathtubs can also be cleaned with glass water. Rinse the cast-iron bathtub with water and dry it with a soft cloth after each use. For stubborn stains, use a small amount of abrasive cleaner. Clean the bottom non-slip surface with a soft nylon brush. Do not scrub with a steel ball, wire brush or abrasive sponge.

2, gentle treatment of surface stains

The surface can be washed with a bleached soft toothbrush and bleached water to remove stains and mold. For difficult stains, you can also use half a lemon dipped in salt, or use a soft toothbrush to apply whitening toothpaste. Turpentine is also good at this time. For limescale, the products used to clean the toilet are very easy to use. If you don't like that harsh taste, you can use lemon and white vinegar as a natural method. Do not use cleaners with a fading function, especially if the bathtub in your home is colored. To deal with mold and fungal bacteria, rinse with bleach and peroxygen water and dry immediately.

3. Repair the scars in time

Do not move the bathtub without permission. You need to move the location. You must contact a professional. Do not hit or hit the surface with hard objects, which may cause injuries or scratches. If you need to repair the dim or scratched part of the acrylic bathtub, you can use a clean cloth and a colorless automatic polishing solution to wipe it vigorously, and then apply a layer of colorless protective wax. Do not wax on the foot area to prevent slipping.

4. Handle pipeline blockages and disinfect on time

The pipes should be cleaned once or twice a week to remove the smell and to prevent the growth of bacteria. You can use a product that specifically cleans the sewer, pour it into the sewer, and clean it after 5 minutes. Be careful not to use it in metal pipes. If the bathtub is blocked, you can first close the drain valve, and then put an appropriate amount of tap water in the bathtub; place the rubber suction device (for dredging the toilet) on the drain valve; while opening the drain valve, hold the tub or The overflow hole of the bathtub; then quickly suck up and down to suck out dirt or hair and clean it up in time. In the case of severe blockage, it can be repeated several times until it is cleared. The bathtub doesn't seem to be necessary in the bathroom, but everyone has a dream of bathing.