Shower room maintenance

1.Clean

Routine cleaning, please rinse with water. Regularly wash with glass water to maintain the smoothness of the glass. Wipe off dirt with a neutral detergent and a soft cloth. Stubborn stains can be removed with a small amount of alcohol. Avoid acidic and alkaline solvents.

2, how to use and maintain the shower room pulley

A. Avoid hitting the movable door with force from below, so as not to cause the movable door to fall off.

B. Pay attention to regularly adding lubricant to the slide rail.

C. Regular adjustment to ensure the effective load and smooth sliding of the pulley to the movable door.

3. Maintenance of tempered glass, aluminum alloy, artificial stone bottom basin

A. Do not hit or impact the glass surface with hard objects (especially corners).

B. Do not wipe the glass surface with strong acid and alkali caustic solution, so as not to damage the surface gloss.

C. Do not wipe the glass surface with metal wire to avoid scratches.

D. Prevent direct sunlight and sun exposure.

4, how to prevent glass from breaking

The impact resistance and bearing capacity of tempered safety glass are more than ten times higher than ordinary glass. However, when the glass is broken due to external forces, the small pieces of glass with obtuse angles are not easy to hurt the human body. However, the disadvantage of tempered glass is that once one corner of glass is accidentally damaged, it does not mean that ordinary glass is only partially broken, but The whole piece is broken. During the production process of tempered glass, due to some factors, the pressure will be broken immediately; or when the internal and external compressive stress of the glass cannot be released after the product is completed, it will be reflected by the product under dynamic conditions. Self-violence phenomenon; or the influence of external factors, such as uneven force during glass installation and hard objects directly pressing the glass surface will cause self-violence phenomenon. Therefore, tempered glass will have a certain rate of self-violence.

In order to prevent or reduce self-explosion, please note the following:

A. When the wheel is loose or falling off, it should be self-checked or a professional visit the wheel to repair the wheel.

B. Do not hit the glass with sharp and hard objects, especially the four corners.

C. Always clean the hygiene inside the track. When foreign objects fall into the lower track, remove it to prevent the pulley from sliding.

D. Ensure the smooth running of the wheels. Add some lubricating oil or lubricating wax when pushing or pulling is not smooth.